Spintech Sidewinder High Performance Brushed Motors 6x15mm + JST Set of 6

Spintech Motors - Spintech sidewinders are some of the highest performance brushed motors available for your micro RC! Get more thrust and faster speeds with these 6x15mm motors! Please break in motors at medium throttle for first 3 flights. Set of 6 motors for hex builds or spares. 80mm wire length. 17300kv for more thrust and power.

Fast 6x15mm brushed motor set Tiny Whoop & Inductrix. And always allow motors to cool between flights. Now has micro JST plugs. 1s 3. 7v voltage. Clockwise red & blue and counterclockwise black & white versions.

More information about Spintech Motors

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

Crazepony - Specificationoutput power: 25mWSupply Voltage: 2. 9-5. 5vsize : 47 * 14. 8 * 12. 5 mmweight: 3. 6gantenna: exclusive dipole whip antennaPower consumption: 200~215MA5V DCINFrequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362~5945mhzfield of view: 120 degrees viewing angleoperating temperature: -10℃~+60℃ambient temperature::25℃channel SEL:Touch SwitchChannel Indicate:CH1~CH8 Channel indication with 8LEDS and A~F frequency, group Indicate with 6LEDSModulation type:FMTransmit power: 13±1dBm; Frequency control: PLLAll harmonic: Max -50dBmFrequency Stability: ±100KHz Typ.

Frequency precision: ±200KHz Typ. Channel carrier error: 1db antenna port: 50 Ωsensor:pal: 720x540/ntsc:640x480 1/4"lens anGEL: H:120°/V:100°Base-band interface: P1. 27*2profile dimension: 14. 5mm*12. 2mm+14. 5mm*12mmpackage including1 * fpv Micro AIO Camera1 * Micro JST 1. 25 to 2 pin wafer Cable 1. 5cm y splitter1 * random color camera mount Fpv micro aio camera 5.

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc - 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix.

More information about Crazepony


Similar products:


Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame

Crazepony - Little modification, more applications for Blade Inductrix. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Miniature and light weight design. Frame wheelbase: 67mm, Frame weight: 5g. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Suitable for eachine e010 JJRC H36 or Tiny Whoop.

Tiny whoop quadcopter frame blade inductrix eachine e010 with 4pcs propellers reddescription:frame wheelbase: 67mmmaterial: pvcpropeller color: RedQuantity: 1pc quadcopter frame and 4pcs 4-leaf propellersUsage: for Tiny Whoop, Blade Inductrix or Eachine E010--------------------Package Including1 * RC Quadcopter E010 Frame Black 4 * 4-leaf Propellers Red1 * Battery Foam Fpv micro aio camera 5.

Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame - 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information.

More information about Crazepony


Similar products:


Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

Crazepony - Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Miniature and light weight design. Tiny whoop Blade inductrix future choice of battery. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation.

This battery will give you higher rpms more power and a considerably longer flight time. High density with great safety fits tiny WhoopPackage Including4 * 230mAh HV 1S Lipo Battery 30C 3. 8v jst-ph 2. 0 connector1 * JST-PH 2. 0 connector Cable Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1.

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector - 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm.

More information about Crazepony


Similar products:


Blade Inductrix/FPV - Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor

Rakon - 1. Rakon. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX. Idtx483-cf. Capacity: standard voltage 4. 2v, 230mahor High voltage 4.

35v, 250ish mah. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

Blade Inductrix/FPV - Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Little modification, more applications for Blade Inductrix.

More information about Rakon


Similar products:


Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera

Crazepony - Impedance :50 Ohm. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Swr:≤2. 0 Tiny whoop Blade inductrix future choice of battery. Retrun loss:﹥-10db. Crazepony 4pcs tiny Whoop FPV Dipole Whip Antenna 5. 8g 35mm omnidirectional weld connector for FX798T FPV Micro AIO CameraDescription:Electrical Characteristics : 5.

8g receiveran omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhzSWR:≤2. 0retrun loss:﹥-10DBAntenna Gain: 1. 5±03dbipolarization : linearimpedance :50 OhmMaterial of Radiator : CuMarerial of PlasticCable type: OD 1. 13mmoperation temperature : -10℃ to +180℃storage temperature : -10℃ to +180℃Connector: WELDWire : RF113balckLength : 35mmPackage Including4 * 5.

Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera - 8g fx798t fpv brass antenna Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14.

More information about Crazepony


Similar products:


Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix Micro JST 1.25 Connector

Crazepony - Tiny whoop Blade inductrix future choice of battery. 4pcs 230mah hv 1s lipo Battery 30C 3. 8v for tiny whoop blade Inductrix Micro JST 1. 25 connectorfeatures:item: hv 1s crazepony Lipo BatteryRate: 30CDimension: 54mm * 12. 5mm * 6. 0mmweight: 6. 3g/per unitcapacity: 230mah in standardvoltage, 250mAh in high voltageThe connector plug: Micro jst 1.

25 aka molex1. 25, pico, mcxthis battery is lighter than the usual 230mah battery, and can be charged to either standard voltage 4.2v, 230mah or high voltage 4. 35v, 250ish mah. This is newly developed chemistry for a longer lifetime and safer charging situation. Dimension: 54mm * 12. 5mm * 6. 0mm, weight: 6. 3g/per unit.

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix Micro JST 1.25 Connector - Polarization : Linear. This battery will give you higher rpms more power and a considerably longer flight time. High density with great safety fits blade inductrix, nano cpx, blade nano qx, blade mcx, champ, umx t-28, blade mCX2, Night Vapor, UMX Corsair, UMX Radian, Whipit, Sport Cub S etcPackage Including4 * 230mAh HV 1S Lipo Battery 30C 3.

8v fpv micro aio camera 5.

More information about Crazepony


Similar products:


Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop

Crazepony - Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. For eaching e010 black frame to fit the standard Tiny Whoop style batteries. Weight: about 027g/pc. Description:Dimension:35*22. 2*7. 5mmweight: about 027g/pccolor: random red, yellow, black, bluePackage Including6 * Foam Insertrandom color Fpv micro aio camera 5.

8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information.

Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop - Wide lens angle. Miniature and light weight design. Color: random red, yellow, black, blue. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv.

More information about Crazepony


Similar products:


Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop for Crazepony FPV Micro AIO Camera

Crazepony - Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. With very light weighs in at 1. 4g. Weight: about 027g/pc. 3pcs f04 fpv camera vacuum plastic mount tiny whoop for Crazepony FPV Micro AIO CameraDescription:This is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops.

It is still low enough to look down between the ducts to drop thru small slots or gaps. This is a camera/vtx mount for the F04 FPV camera within 3 colors of Green, Red, Transparent color. With very light weighs in at 1. 4g. Antenna Gain: 1. 5±03dbi. The connector plug: micro jst 1. 25 aka molex1. 25, pico, mCX. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation.

Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop for Crazepony FPV Micro AIO Camera - Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Including 1pc quadcopter frame and 4pcs 4-leaf propellers.

More information about Crazepony


Similar products:


LHI RC Quadcopter Frame Black and 8pcs Propellers Blue for Tiny Whoop Blade Inductrix or Eachine E010

LHI - Including 1pc quadcopter frame and 4pcs 4-leaf propellers. The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Idtx483-cf. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation.

Polarization : Linear. With very light weighs in at 1. 4g. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Suitable for eachine e010 JJRC H36 or Tiny Whoop. Small Size: 4. 7 * 4. 0 * 1. 5 cm. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

LHI RC Quadcopter Frame Black and 8pcs Propellers Blue for Tiny Whoop Blade Inductrix or Eachine E010 - All stock hardware is used, super simple installation. Suitable for tiny whoop, eachinE E010 mini drone.

More information about LHI


Similar products:


Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

Crazepony - Impedance :50 Ohm. An omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhzv. Miniature and light weight design. Material: PVC. Tiny whoop Blade inductrix future choice of battery. Frame wheelbase: 67mm, Frame weight: 5g. The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX.

Output connector: 6x micro jst 1. 25; 6x jst-ph 2. 0 Package includes: 1pc quadcopter frame and 4pcs 4-leaf propellers. Weight: about 027g/pc. Input charge connector: Male 4mm Banana Plug. Dimension: 54mm * 12. 5mm * 6. 0mm, weight: 6. 3g/per unit. Note the location where the battery is placed. Including 1pc quadcopter frame and 4pcs 4-leaf propellers.

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX - Suitable for battery of blade inductrix, Nano CP X, glimpse, mCP X, Nano QX 3D, Nano QX etc. Little modification, more applications for Blade Inductrix.

More information about Crazepony


Similar products:
Uncategorized