RPM Traxxas Sealed Gear Cover, Blue

Rpm gear covers for the electric versions of the Traxxas Stampede, Rustler, Bandit and Slash are sold in black or blue and carry our limited lifetime warranty against failure due to materials or workmanship issues. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter.

Retains all stock geometry for easy bolt up; no cutting or gluing required. More clearance for larger pinions for owners hungry for speed. An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Completely sealed. Sleek contours that would look great on any vehicle.

We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. The most recent electric versions of the e-rustler, e-Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler.

These changes now allow this gear cover to fit all versions of these awesome vehicles.

---

RPM 80245 Front A-Arms Blue Monster Jam/Rustler/Stampede/Slash 2

Key featuresnearly 25% lighter than stockstronger material resists flexing and breakingIncreased clearance in outer area of arms For use on the e-rustler, Monster Jam, Stampede, and Slash. Tech note: these a-arms will not work on the nitro versions of the Rustler and Stampede. Backed by rPM's world-renowned breakage warranty.

Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.


Similar products:

---

RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2WD Electric, Blue

Fits traxxas 2wd slash, 2wd Stampede, e-Rustler and Bandit. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Molded rear mounts separate from the gearbox housing and easy to access. Backed by rPM's world-renowned breakage warranty. Aluminum motor plate manufactured in the USA from 3mm thick, 6061 T6 aluminum for serious strength and durability.

. Comes will all necessary mounting hardware and instructions. Our gearbox housing and mounts are a blend of aluminum and molded nylon parts for the perfect combination of strength, durability and heat dissipation. Gearbox housing molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style.

The rpm hybrid gearbox housing and rear Mounts for Traxxas 2wd vehicles is designed to solve a multitude of issues with stock and other aftermarket transmission housings. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States. For use on the e-rustler, Stampede, Monster Jam, and Slash.

Tech note: these a-arms will not work on the nitro versions of the Rustler and Stampede.


Similar products:

---

RPM Wide Front Bumper Black Rustler, Stampede, Bandit, Blue

Gearbox housing molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style. Molded rear mounts separate from the gearbox housing and easy to access. This bumper stands six inches wide and adds an extra 1-1/2" worth of bulletproof, protection to the front end of the vehicle.

Backed by rPM's world-renowned breakage warranty. Give that traxxas nitro or electric Rustler, Stampede, Nitro Sport or Bandit added protection with the RPM wide front bumper. Aluminum motor plate manufactured in the USA from 3mm thick, 6061 T6 aluminum for serious strength and durability. These bumpers will help reduce front end damage during head on collisions with curbs, trees, etc.

Nothing surpasses the protection gained when your Traxxas vehicle is protected with an RPM wide front bumper! . Rpm designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black to give it that stock-looking appearance, or in optional blue or green to match the line of Grave Digger and Son-Uva-Digger chassis and body paint schemes.

Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Replaces weaker stock components. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States.


Similar products:

---

RPM 80185 Rear A-Arms Blue E- Monster Jam, Rustler, Stampede

Fits traxxas 2wd slash, 2wd Stampede, e-Rustler and Bandit. These a-arms are backed by our limited lifetime warranty against breakage as well for confidence-inspiring durability and performance. Comes will all necessary mounting hardware and instructions. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States.

Gearbox housing molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Additionally, the new geometry design leaves no place for dirt and rocks to get caught in the lower A-arm and reduces the chances of rocks and debris getting stuck between the axle and the arm.

Rpm slash rear A-arms are sold in pairs. Rpm slash rear a-arms use stock suspension geometry and include stock rear toe angles. Rpm slash rear a-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track.

They are molded in our nearly indestructible blend of nylons and are sold in either black our blue. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States. Molded rear mounts separate from the gearbox housing and easy to access.


Similar products:

---

Traxxas 3741A Blue-Anodized Aluminum Turnbuckles and Camber Links, Front 39mm 2, rear 49mm 2

For use on the e-rustler, Stampede, Monster Jam, and Slash. Tech note: these a-arms will not work on the nitro versions of the Rustler and Stampede. Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. This product is made from high quality materials and designed for lasting performance.

Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Backed by rPM's world-renowned breakage warranty. Designed to increase durability. Aluminum turnbuckles blue-anodized. Aluminum motor plate manufactured in the USA from 3mm thick, 6061 T6 aluminum for serious strength and durability.

Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. Replaces weaker stock components. For use on the e-Rustler, Stampede, and Monster Jam. Backed by rPM's world-renowned breakage warranty. Gearbox housing molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style.

Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States.


Similar products:

---

Blue Aluminum Tie Bar for Slash 2WD, Rustler 2WD, Stampede 2WD, Nitro Rustler, Nitro Slash, Nitro Stampede, Bandit 2WD and Nitro Sport

Backed by rPM's world-renowned breakage warranty. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States. Gearbox housing molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style.

Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States. This is a great upgrade for both bashers and racers looking to add some performance and style to their traxxas slash, monster jam, stampede, or bandit! what's included: 1 luxury rc aluminum tie bar applications: traxxas Slash Traxxas Slash F-150 Raptor Traxxas Slash Robby Gordon Dakar Edition Traxxas Rustler requires Traxxas part number 2640* Traxxas Rustler VXL Traxxas Stampede requires Traxxas part number 2640* Traxxas Stampede VXL Traxxas Bandit requires Traxxas part number 2640* Traxxas Bandit VXL Traxxas Nitro Slash Traxxas Nitro Rustler Traxxas Nitro Stampede Traxxas Nitro Sport For use on the e-rustler, Stampede, Rustler, and Slash.

Tech note: these a-arms will not work on the nitro versions of the Rustler and Stampede. Compatible with all model: traxxas slash 2wd, slash f-150 raptor, stampede 2wd requires traxxas part number 2640*, Stampede 2WD VXL, nitro rustler, nitro stampede, Rustler requires Traxxas part number 2640*, Rustler VXL, bandit requires traxxas part number 2640*, Nitro Slash, Bandit VXL, Nitro Sport.

One year Limited Warranty. Direct Replacement. High-grade 7075-T6 aluminum ensures increased bending stiffness.


Similar products:

---

Traxxas 3632A Blue-Anodized 6061-T6 Aluminum Caster Blocks pair

Laser etched TRX logo. Replaces weaker stock components. Blue-anodized 6061-T6 aluminum. Includes suspension screw pin 2. This is for use on rc vehicles such as the Traxxas Stampede and Rustler; consult your user's manual for exact parts listings. Available in blue, Red, Black and Silver Anodize. Molded rear mounts separate from the gearbox housing and easy to access.

Gearbox housing molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. High-grade 7075-T6 aluminum ensures increased bending stiffness.

One year Limited Warranty. Aluminum motor plate manufactured in the USA from 3mm thick, 6061 T6 aluminum for serious strength and durability. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Backed by rPM's world-renowned breakage warranty.

Compatible with all model: traxxas slash 2wd, stampede 2wd vxl, rustler requires traxxas part number 2640*, Nitro Slash, Rustler VXL, nitro rustler, Stampede 2WD requires Traxxas part number 2640*, Bandit VXL, Slash F-150 Raptor, bandit requires traxxas part number 2640*, nitro stampede, Nitro Sport.

Left and right 30-degree caster blocks. Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model.


Similar products:

---

RPM 80595 Rear A-Arms Blue Slash Blue

Rpm is proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Fits traxxas 2wd slash, 2wd Stampede, e-Rustler and Bandit. Overviewrpm rear a-arms for the traxxas Slash are designed specifically for the Slash - they are not multi-platform A-arms like the stock versions.

Our first design challenge was to beef up our version of the Slash rear A-arms to handle some serious abuse. Simple bolt-on installation. Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Assembled w/rod ends & hollow balls and includes wrench. One year Limited Warranty. Rpm slash rear a-arms use stock suspension geometry and include stock rear toe angles. Rpm slash rear a-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track.

Even after all of the increased muscle has been factored in, our a-arms still come in at over 10% lighter than the original arms! Our final design task was to improve the fit and finish and what we came up with will eliminate most of the slop in the rear suspension system! The Slash owner can tighten things up to near perfect out back simply by adding in a set of our #80382 Rear Bearing Carriers currently available.

For use on the e-Rustler, Stampede, and Monster Jam.


Similar products:

---

Traxxas 3678X Blue Wheelie Bar, Assembled Fits Slash, Stampede, Rustler, Bandit Series

Simple bolt-on installation. Available in blue, Red, Black and Silver Anodize. Tech note: these a-arms will not work on the nitro versions of the Rustler and Stampede. Backed by rPM's world-renowned breakage warranty. Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability.

This product is made from high quality materials and designed for long-lasting performance. Quickly and easily installs onto Traxxas electric Slash 2WD, Bandit, Rustler, and 2WD Stampede vehicles. Durable composite nylon construction offers an extra level of protection for the motor and transmission case.

Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Backed by rPM's world-renowned breakage warranty. Brilliant blue anodizing. The upper axle carrier hole. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States.

For use on the e-Rustler, Stampede, and Monster Jam. Molded rear mounts separate from the gearbox housing and easy to access. Assembled w/rod ends & hollow balls and includes wrench.


Similar products:

---

RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash, Rustler, Stampede, and Bandit, Blue

Tech note: these a-arms will not work on the nitro versions of the Rustler and Stampede. Compatible with all model: traxxas slash 2wd, nitro rustler, stampede 2wd requires traxxas part number 2640*, Bandit VXL, Slash F-150 Raptor, Nitro Slash, Rustler requires Traxxas part number 2640*, Rustler VXL, Stampede 2WD VXL, bandit requires traxxas part number 2640*, nitro stampede, Nitro Sport.

Left and right 30-degree caster blocks. Blue-anodized 6061-T6 aluminum. This is for use on rc vehicles such as the Traxxas Stampede and Rustler; consult your user's manual for exact parts listings. Cnc precision 6061 Aluminum. Rpm is proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA!

Fits traxxas 2wd slash, 2wd Stampede, e-Rustler and Bandit. Includes suspension screw pin 2. For use on the e-Rustler, Stampede, and Monster Jam. The rpm rear bumper/wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Replaces weaker stock components. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the United States.

To lower the rear end of the truck, RPM recommends using the outer shock mount hole positions in the A-arm.


Similar products: