Lykus Water Resistant Backpack for DJI Phantom 4/3/2 Series

Lykus LS1511 - Compared to hard shell bags, this bag is soft and makes users feel comfortable. Designated space for drone, accessories, and MoreThe interior of the bag is specially and thoughtfully designed to hold the drone and its accessories. Soft shoulder and waist straps make it super comfortable to carry and ease the burden on your body.

It can hold all DJI Phantom models. Light, durable, and water resistant; size is good for carry-on measurements. It also comes with detachable holders that add another layer of protection. Specificationsdimension length x width x depth: 21 inch 52 cm x 17 inch 42 cm x 9 inch 22 cm - Good for carry-on. Weight: 4.

Lykus Water Resistant Backpack for DJI Phantom 4/3/2 Series - 23 lbs 1. 92 kgcompatible drone model:dji phantom 4, and 4kdji phantom 2other similar sized dronespackage contents:lykus bag and anti-water coverWarranty:1 Year Return/Replacement Fit all dji phantom models - phantom 4/ pro/ Advanced, AdvancedDJI Phantom 3 Standard, Advanced, Pro, Professional, Pro+, Phantom 3 Standard/ Pro / Advanced / 4K, other similar sized drones.

This water resistant drone backpack is perfect for outdoor use. Controller and charger can be stored in the upper compartment securely. Features- light but strongthe backpack uses high quality canvas material to make it light, water resistant, durable, and somewhat hard on the front cover. The thick and soft pads in the straps, and at the back and waist areas reduce the pressure, which is good for long-time carrying.

More information about Lykus LS1511

DJI DJI-P3-Battery Intelligent Battery for Phantom 3 Drones White

DJI 6958265123351 - Intelligent charging, cell health display via the DJI Pilot app, one-touch power check onboard. This battery is the same battery that comes with the Phantom 3 series of quad copters. Refer the user manual below for troubleshooting. 4, 480 mah at 15. 2 v 4 cells in serial, 4S. It features four LEDs that display remaining battery capacity.

The dji intelligent flight battery for Phantom 3 is a 4480-mAh, 15. 2 v lithium-polymer battery designed for the Phantom 3 series. Compatible with phantom 3 drones only; will not work with the Phantom 2 or Phantom 1. Power management is handled internally meaning the battery doesn't require a separate balance lead to control charging.

DJI DJI-P3-Battery Intelligent Battery for Phantom 3 Drones White - Simple slide-in design means no unsightly wires or difficult plugs to connect.

More information about DJI 6958265123351


Similar products:


Shaluoman Silica Gel Motor Guard Cap for Phantom 4 Motor Protector Cover Pack of 4 White

Shaluoman - For dji phantom 4 only material: sillica gel color: white Quantity: 4 pcs Package included: 4 pcs x Motor cover Note: Phantom 4 and other accessories are not included. Simple slide-in design means no unsightly wires or difficult plugs to connect. Compatible with phantom 3 drones only; will not work with the Phantom 2 or Phantom 1.

Intelligent charging, cell health display via the DJI Pilot app, one-touch power check onboard. Refer the user manual below for troubleshooting. 4, 480 mah at 15. 2 v 4 cells in serial, 4S. For dji phantom 4 quadcopter.

More information about Shaluoman


Similar products:


DJI CP.PT.000342 Phantom 4 Intelligent Flight Battery

DJI Europe B.V. DJIP4BAT - The phantom 4 - intelligent Flight Battery is a 5350mAh, 15. 2v lipo battery that is specifically designed for the Phantom 4, enabling optimal performance. Built-in sensors and bright LEDs. The battery also has built-in sensors and bright LEDs that let you know the status and remaining power of your battery in real time.

Simple slide-in design means no unsightly wires or difficult plugs to connect. For dji phantom 4 quadcopter. Intelligent charging, cell health display via the DJI Pilot app, one-touch power check onboard. Refer the user manual below for troubleshooting. 5350mah, 15. 2v liPo battery. 4, 480 mah at 15. 2 v 4 cells in serial, 4S.

DJI CP.PT.000342 Phantom 4 Intelligent Flight Battery - Specifically designed for the Phantom 4. Compatible with phantom 3 drones only; will not work with the Phantom 2 or Phantom 1.

More information about DJI Europe B.V. DJIP4BAT


Similar products:


Neewer for DJI Phantom 3 Standard Professional and Advanced, Protective Camera Lens Cap Protector Cover + Flower-type Rose Petal Lens Hood Made of Premium ABS Plastic Black

Neewer® Neewer - The lens cap helps lock camera to gimbal and prevent the lens from dust and scratches while storing and transporting. Lightweight design with fine workmanship for excellent well-built products. Compatible with phantom 3 drones only; will not work with the Phantom 2 or Phantom 1. Built-in sensors and bright LEDs.

Intelligent charging, cell health display via the DJI Pilot app, one-touch power check onboard. Simple slide-in design means no unsightly wires or difficult plugs to connect. The lens hood is cut out in a rose petal design to effectively prevent sun flare and prop shadowing. Made of high impact abs plastic for extra durability.

Neewer for DJI Phantom 3 Standard Professional and Advanced, Protective Camera Lens Cap Protector Cover + Flower-type Rose Petal Lens Hood Made of Premium ABS Plastic Black - Note: dji phantom 3 camera NOT INCLUDED. For dji phantom 4 quadcopter. Specially designed lens cap and lens hood for the DJI Phantom 3 Standard, Professional, and Advanced. Specifically designed for the Phantom 4. 5350mah, 15. 2v liPo battery. Note: dji phantom 3 camera NOT INCLUDED. Description:lens cap:custom made for dJI Phantom 4, Professional, DJI Phantom 3 Standard, and Advanced camera lens.

More information about Neewer® Neewer


Similar products:


SKYREAT Copper Parabolic Antenna Range Booster for DJI Phantom 3 Standard / SE Controller Transmitter Signal Extend

SKYREAT - Simple slide-in design means no unsightly wires or difficult plugs to connect. 5350mah, 15. 2v liPo battery. Refer the user manual below for troubleshooting. Accurate parabolic curved booster completely reflects the remote signal to the antenna the focal point of the reflector. The lens cap helps lock camera to gimbal and prevent the lens from dust and scratches while storing and transporting.

Made of high impact abs plastic for extra durability. Compatible with phantom 3 drones only; will not work with the Phantom 2 or Phantom 1. Lightweight design with fine workmanship for excellent well-built products. Parabolic reflector. No bump or deformation on the reflecting panel!!! Intelligent charging, cell health display via the DJI Pilot app, one-touch power check onboard.

SKYREAT Copper Parabolic Antenna Range Booster for DJI Phantom 3 Standard / SE Controller Transmitter Signal Extend - Specially designed lens cap and lens hood for the DJI Phantom 3 Standard, Professional, and Advanced. 4, 480 mah at 15. 2 v 4 cells in serial, 4S. Built-in sensors and bright LEDs. It improves both remote control and Wi-Fi video connection performance for DJI Phantom 3 Standard.

More information about SKYREAT


Similar products:


DJI Phantom 4 Intelligent Battery Charging Hub, White 6958265112836

DJI Europe B.V. 6958265112836 - The phantom 4 battery charging Hub is designed for use with the Phantom 4 Intelligent Flight Battery. Refer the user manual below for troubleshooting. Charge up to three Intelligent Flight Batteries. 5350mah, 15. 2v liPo battery. Design for your dji phantom 3 Standard /Phantom 3 SE Controller. Lightweight design with fine workmanship for excellent well-built products.

Made of high impact abs plastic for extra durability. Specifically designed for the Phantom 4. 4, 480 mah at 15. 2 v 4 cells in serial, 4S. When used with the phantom 4 Battery Charger, it can charge up to three Intelligent Flight Batteries. The lens cap helps lock camera to gimbal and prevent the lens from dust and scratches while storing and transporting.

DJI Phantom 4 Intelligent Battery Charging Hub, White 6958265112836 - Simple slide-in design means no unsightly wires or difficult plugs to connect. It improves both remote control and Wi-Fi video connection performance for DJI Phantom 3 Standard. Please make sure the copper side face to the drone. Designed for use with the Phantom 4 Intelligent Flight Battery. Parabolic reflector.

Accurate parabolic curved booster completely reflects the remote signal to the antenna the focal point of the reflector.

More information about DJI Europe B.V. 6958265112836


Similar products:


SummitLink Snap On/off Prop Guards 2x Red 2x White for DJI Phantom 1 2 3 Quick Connect Tool Free Also Fit on Phantom 3 Standard

SummitLink - The lens cap helps lock camera to gimbal and prevent the lens from dust and scratches while storing and transporting. 4, 480 mah at 15. 2 v 4 cells in serial, 4S. Design for your dji phantom 3 Standard /Phantom 3 SE Controller. Include screws for Phantom 3 Professional Advanced and Standard. Fits up to 10 inch Props.

Fits all phantom versions, phantom vision, phantom 2, Phantom 3 Professional and Advanced and Standard, including Phantom 1, Phantom 2 Vision+, Phantom FC40.5350mah, 15. 2v liPo battery. Tool-free installation. With these prop guard, walls, you will never break your props and crash your Phantom by accidently bump into trees, or any other obstacles.

SummitLink Snap On/off Prop Guards 2x Red 2x White for DJI Phantom 1 2 3 Quick Connect Tool Free Also Fit on Phantom 3 Standard - Dji phantom prop guard tool-Free Quick Snap On/Off Prop Guards. That is no longer the case, now we introduce the worlds 1st snap on/off complete prop guards kit! fits up to 10 inch props. Compatible with phantom 3 drones only; will not work with the Phantom 2 or Phantom 1. Specially designed lens cap and lens hood for the DJI Phantom 3 Standard, Professional, and Advanced.

Mounting and unmounting takes only seconds. For dji phantom 4 quadcopter.

More information about SummitLink


Similar products:


Anbee Black Lanyard Shoulder Belt Neck Strap Sling for DJI Phantom 2 Vision, Phantom 3, Phantom 4, Inspire 1 Remote Controller

Anbee - Simple slide-in design means no unsightly wires or difficult plugs to connect. Lightweight design with fine workmanship for excellent well-built products. Storage Mode. Adjustable black lanyard shoulder Belt Neck Strap for All DJI Series Remote Controller. Intelligent charging, cell health display via the DJI Pilot app, one-touch power check onboard.

The lens hood is cut out in a rose petal design to effectively prevent sun flare and prop shadowing. Parabolic reflector. Fits up to 10 inch Props. Snap on/off removable prop guards for Phantom 1 2 and Phantom 3 All Version. Mounting and unmounting takes only seconds. No bump or deformation on the reflecting panel!!!

Anbee Black Lanyard Shoulder Belt Neck Strap Sling for DJI Phantom 2 Vision, Phantom 3, Phantom 4, Inspire 1 Remote Controller - For dji phantom 4 quadcopter. Specially designed lens cap and lens hood for the DJI Phantom 3 Standard, Professional, and Advanced. 4, 480 mah at 15. 2 v 4 cells in serial, 4S. Specifically designed for the Phantom 4. Compatible with almost all dji series remote controller: dji phantom 2-Vision-Vision+, Phantom 4, Inspire 1, Phantom 3 Professional / Standard / Advanced / 4K, Matrice M100.

More information about Anbee


Similar products:


SKYREAT Copper Parabolic Antenna Signal Range Booster for DJI Phantom 4/4 Pro/Phantom 3 Pro/Advanced/4k/ Inspire 1 Controller Transmitter Signal Extender 2 Pcs

SKYREAT - Tool-free installation. With these prop guard, walls, you will never break your props and crash your Phantom by accidently bump into trees, or any other obstacles. Dji phantom prop guard tool-Free Quick Snap On/Off Prop Guards. The lens cap helps lock camera to gimbal and prevent the lens from dust and scratches while storing and transporting.

Mounting and unmounting takes only seconds. Intelligent charging, cell health display via the DJI Pilot app, one-touch power check onboard. Compatible with phantom 3 drones only; will not work with the Phantom 2 or Phantom 1. Made of high impact abs plastic for extra durability. Design for your dji phantom 3 Standard /Phantom 3 SE Controller.

SKYREAT Copper Parabolic Antenna Signal Range Booster for DJI Phantom 4/4 Pro/Phantom 3 Pro/Advanced/4k/ Inspire 1 Controller Transmitter Signal Extender 2 Pcs - The lens hood is cut out in a rose petal design to effectively prevent sun flare and prop shadowing. Include screws for Phantom 3 Professional Advanced and Standard. Charge up to three Intelligent Flight Batteries. Built-in sensors and bright LEDs. It improves both remote control and Wi-Fi video connection performance for DJI Phantom 3 Standard.

Please make sure the copper side face to the drone. Designed for use with the Phantom 4 Intelligent Flight Battery.

More information about SKYREAT


Similar products:


O-XOXO Propellers for DJI Phantom 3 - Self-tightening 9450 Propellers - 2 Pairs

O-XOXO DJI Phantom 3 9450 - 90g, length adjustable from 53 to 70cm. Design for your dji phantom 4/p4 pro/Phantom 3 Pro/Advanced/4K Inspire 1 controller transmitter. Accurate parabolic curved booster completely reflects the remote signal to the antenna the focal point of the reflector. Design for your dji phantom 3 Standard /Phantom 3 SE Controller.

5350mah, 15. 2v liPo battery. Storage Mode. Durable plastic construction provides both lightness and rigidity. Specifically designed for the Phantom 4. Intelligent charging, cell health display via the DJI Pilot app, one-touch power check onboard. The lens hood is cut out in a rose petal design to effectively prevent sun flare and prop shadowing.

O-XOXO Propellers for DJI Phantom 3 - Self-tightening 9450 Propellers - 2 Pairs - No bump or deformation on the reflecting panel!!! It improves both remote control and Wi-Fi video connection performance for DJI Phantom 3 Standard. Please make sure the copper side face to the drone. Designed for use with the Phantom 4 Intelligent Flight Battery. Note: dji phantom 3 camera NOT INCLUDED. Mounting and unmounting takes only seconds.

More information about O-XOXO DJI Phantom 3 9450


Similar products: