Inkbird Itc-308 Digital Temperature Controller Outlet Thermostat, 2-stage, 1100w, w/ Sensor

Inkbird Tech. ITC-308 - Support reading with Centigrade or Fahrenheit unit. Specification temperature control range : -50~99 °C / -58~210 ° F Temperature Resolution: 01 ° c / 01° f temperature accuracy: ±1°c -50 ~ 70°c / ±1°f -50 ~ 160° f temperature control mode :on/off control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max.

. Dual display window, be able to display measured temperature and set temperature at the same time. 10a, 100v ~240v ac buzzer alarm: high and low temperature Alarm Sensor Type: NTC sensor Including Sensor Length: 2m / 6. 56ft input power Cable Length: 1. 5m 5ft output power cable length: 30cm 1ft Dimension Body: 140x68x33mm 5.

Inkbird Itc-308 Digital Temperature Controller Outlet Thermostat, 2-stage, 1100w, w/ Sensor - 5x2. 7x1. 3inch socket: 85x42x24mm3. 3x1. 7x1inch ambient temperature: -30~ 75 ° c / -22~ 167 ° f storage temperature: -20~ 60 ° c / -4~ 140 ° f humidity 20~85% no condensate Warranty: 1 Year Package Content: 1x ITC-308 temperature controller; 1x Manual Note: This listing sensor's probe dimension is 50mm x 6mm.

Dual relay output, be able to connect with refrigeration and heating equipment at the same time. Plug and play design, easy to use;. Main features: plug and play design, be able to connect with refrigeration and heating equipment at the same time; support reading with Centigrade or Fahrenheit unit; Maximum output load: 1100W110V; Dual display window, easy to use; Dual relay output, be able to display measured temperature and set temperature at the same time; Temperature calibration; Compressor delay protection for refrigeration control High and low temperature alarms are available; Over-temperature and sensor fault alarm Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.

More information about Inkbird Tech. ITC-308

Allied Precision The Premier Line 742G Bucket Water Heater

Allied Precision 742G - Rests easily in 5 gallon Bucket. Rests easily in 5 gallon bucket. 6 foot power cord 120 volts rests easily in 5 gallon bucket. 1000 watt, 120 volt power will heat water over 150º. Designed to continuously heat buckets of water. Thermostatically controlled to prevent overheating. For use in water only. 6 foot power cord 120 Volts rests easily in 5 gallon Bucket.

Thermostatically controlled to prevent overheating. Ideal for use on cold winter days. Stainless Steel guard.

More information about Allied Precision 742G


Similar products:


Inkbird AC 110V Digital Pre-wired Outlet Dural Stage Humidity Controller with Sensor, Dehumidification Humidifaction Control for Humidifier Dehumidifier Greenhouse Reptile Exhaust Fan Charcuterie

Inkbird Tech IHC200S - It can maintain the humidity between humidification and dehumidification automatically. The maximum electrical load is 10A. 10a, 100v ~240v ac humidity measuring Range : 5%-99. 99%rh humidity control range : 5%-99%rh resolution: 1%rh accuracy: ±3%RH Sensor model: AM-2301 Sensor stability:. It is an easy-to-use, safe and reliable dual relay output humidity controller.

It is widely used for mushroom, crawl space, snake cage, ventilator fan, curing chanmber, turtle enclosure, mini greenhouse, tobacco cage and so on. Feature: power input: 100 ~240vac, 50Hz/60Hz Power Output: Max. In addition, the humidifier and dehumidifier can be programmed separately, too. It can fit many residential humidifier and dehumidifier.

Inkbird AC 110V Digital Pre-wired Outlet Dural Stage Humidity Controller with Sensor, Dehumidification Humidifaction Control for Humidifier Dehumidifier Greenhouse Reptile Exhaust Fan Charcuterie - Its play-n-plug designed: Plug it into wall socket, set your controller's humidification or dehumidification values to your need.

More information about Inkbird Tech IHC200S


Similar products:


Homebrew Fermentation Heater by TheBrewersCorner

TheBrewersCorner COMINHKPR111542 - Brand new 6 foot power cord 120 volts rests easily in 5 gallon bucket. Stainless Steel guard. For use in water only. Alarm when humidity exceeds high/low humidity setting value. Homebrew Fermentation Heater. Designed to continuously heat buckets of water. Alarm when sensor error or humidity exceeds limit. Switch the modes between humidification and dehumidification automatically.

. Control humidity by setting value and differential value. Calibrate the humidity value, Delay protection for Control output, Query current temperature. 1000 watt, 120 volt power will heat water over 150º. Thermostatically controlled to prevent overheating. Rests easily in 5 gallon bucket. Ideal for use on cold winter days.

More information about TheBrewersCorner COMINHKPR111542


Similar products:


Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother 5

Learn To Brew 5 soother - When you are ready to shut the bar down for the night, just give the inside of your faucet a little spritz of sanitizer then slip on your faucet cap. Protects faucets from insects and bacteria that can get into the spout of your faucet. Let’s just say that fruit flies are probably the more tame beasties that can get up in there and taint your beer.

Simple and effective works with nearly all types and brands of draft faucet including Perlick. Homebrew Fermentation Heater. Draft faucet cap sanitary cover - tap soother. Control humidity by setting value and differential value. Another advantage to these faucet caps is that they can help prevent dried beer from sicking your faucet shut.

Home Brew Stuff Draft Faucet Cap Sanitary Cover, Tap Soother 5 - The best way to keep faucets clean and sanitary. This leftover beer will attract insects and harbor bacteria, so the next time you pour a few, that beer might not be so pristine. Rests easily in 5 gallon bucket. Calibrate the humidity value, Delay protection for Control output, Query current temperature. The cap will keep the insides of your faucet spout nice, clean and bug free until you are ready to pour another beer.

Ideal for use on cold winter days. 6 foot power cord 120 volts rests easily in 5 gallon bucket.

More information about Learn To Brew 5 soother


Similar products:


Star San- 32 oz

Home Brew Stuff B0064O7YFA - Homebrew Fermentation Heater. This synergistic blend provides a unique killing system that is unaffected by excessive organic soils. Prevents Water Spotting on Equipment. Designed to continuously heat buckets of water. Thermostatically controlled to prevent overheating. It can be applied through a foamed to produce self-adhering sanitizing foam for external sanitation.

An essential part of draft faucet hygiene. 1000 watt, 120 volt power will heat water over 150º. Star san is a self-foaming acid sanitizer ideal for brewing, dairy and other food and beverage equipment. The best way to keep faucets clean and sanitary. Star san is a blend of phosphoric acid and dodecylbenzenesulfonic acid.

Star San- 32 oz - Alarm when sensor error or humidity exceeds limit. Star san also reduces water spotting and can be used without rinsing under the proper concentrations. Alarm when humidity exceeds high/low humidity setting value. 6 foot power cord 120 volts rests easily in 5 gallon bucket. Calibrate the humidity value, Delay protection for Control output, Query current temperature.

. Ideal for brewing and Other Food and Beverage Equipment.

More information about Home Brew Stuff B0064O7YFA


Similar products:


Universal Kegco type O-Ring Five Gasket Sets for Cornelius Home Brew Keg and Homebrewed With Pride keg sticker

stir-plate 5KegOringKit - Calibrate the humidity value, Delay protection for Control output, Query current temperature. 32 oz. Self-foaming Sanitizer. Protects faucets from insects and bacteria that can get into the spout of your faucet. Control humidity by setting value and differential value. Simple and effective. Alarm when humidity exceeds high/low humidity setting value.

Thermostatically controlled to prevent overheating. Includes o-ring chart and a 1-2/3" diameter "homebrewed witH PRIDE" keg label! 6 foot power cord 120 volts rests easily in 5 gallon bucket. 1000 watt, 120 volt power will heat water over 150º. Designed to continuously heat buckets of water. The best way to keep faucets clean and sanitary.

Universal Kegco type O-Ring Five Gasket Sets for Cornelius Home Brew Keg and Homebrewed With Pride keg sticker - Includes o-ring chart and a 1-2/3" diameter "HOMEBREWED WITH PRIDE" keg label! For use in water only. Alarm when sensor error or humidity exceeds limit. Switch the modes between humidification and dehumidification automatically. Prevents Water Spotting on Equipment. Stainless Steel guard. This complete o-ring set replaces all the gaskets you will need to refurbish five used home brew kegs.

More information about stir-plate 5KegOringKit


Similar products:


Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator

Taprite T752HPG - Works with nearly all types and brands of draft faucet including Perlick. Includes o-ring chart and a 1-2/3" diameter "HOMEBREWED WITH PRIDE" keg label!32 oz. Self-foaming Sanitizer. Calibrate the humidity value, Delay protection for Control output, Query current temperature. For use in water only. Homebrew Fermentation Heater.

Large easy adjusting knob to increase or decrease delivery pressure. Ideal for brewing and Other Food and Beverage Equipment. Hose barb nipple. O-ring set includes: 5 lid closure o-rings 10 ball lock tank Plug O-Rings 10 Pin Lock Tank Plug O-Rings 10 Universal Dip Tube O-Rings. Switch the modes between humidification and dehumidification automatically.

Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator - Outlet features shut-off with back flow check valve and 5/16" I. D. Thermostatically controlled to prevent overheating. Alarm when sensor error or humidity exceeds limit. Control humidity by setting value and differential value. An essential part of draft faucet hygiene. Alarm when humidity exceeds high/low humidity setting value.

More information about Taprite T752HPG


Similar products:


Sankey to Ball Lock Quick Disconnect Conversion Kit

Home Brew Stuff 4048 - Easy to install. An essential part of draft faucet hygiene. This complete o-ring set replaces all the gaskets you will need to refurbish five used home brew kegs. Universal kit - fits Ball Lock Pepsi and Pin Lock Coke kegs! Alarm when humidity exceeds high/low humidity setting value. Simple and effective. Ideal for use on cold winter days.

Stainless Steel guard. Once that's done, you'll be able to quickly and efficiently change out your kegs to enjoy both mass-produced commercial beer and your own homebrew creations. Blow-off is factory set at 55-65 psig. Each post threads onto the standard US 7/8" x 14 female straight pipe thread draft fittings of your coupler.

Sankey to Ball Lock Quick Disconnect Conversion Kit - Features: ball-lock posts easily attach to Sankey coupler air and beer line fittings. Makes it easy to toggle between commercial and homebrew beers. Includes o-ring chart and a 1-2/3" diameter "HOMEBREWED WITH PRIDE" keg label!6 foot power cord 120 volts rests easily in 5 gallon bucket. Hose barb nipple. Makes it easy to toggle between commercial and homebrew beers.

Works with nearly all types and brands of draft faucet including Perlick.

More information about Home Brew Stuff 4048


Similar products:


Beer Drip Tray 10" Stainless Steel Wall Mount No Drain

Kegco SEDP-106 - Ideal for use on cold winter days. Finish: Stainless Steel. Makes it easy to toggle between commercial and homebrew beers. Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure. A great kegco type o-ring kit value - rebuild 5 kegs for $2.

99 / keg!!! Screws not included. Easy to install. Fits standard us 7/8" x 14 female straight pipe thread draft fittings on US Sankey coupler. Outlet features shut-off with back flow check valve and 5/16" I. D. Works with nearly all types and brands of draft faucet including Perlick. Includes both gas and liquid side ball-lock posts.

Beer Drip Tray 10" Stainless Steel Wall Mount No Drain - Includes o-ring chart and a 1-2/3" diameter "HOMEBREWED WITH PRIDE" keg label! Thermostatically controlled to prevent overheating. Protects faucets from insects and bacteria that can get into the spout of your faucet. Simple and effective. 32 oz. Self-foaming Sanitizer.

More information about Kegco SEDP-106


Similar products:


AC Infinity AXIAL 1238, Muffin Cooling Fan, 115V AC 120mm by 120mm by 38mm High Speed

AC Infinity HS1238A-X - Rests easily in 5 gallon bucket. 32 oz. Self-foaming Sanitizer. Large easy adjusting knob to increase or decrease delivery pressure. Switch the modes between humidification and dehumidification automatically. Applications this is the most popular size and can be found in noise tolerant applications such as tanning beds, server racks, industrial machinery, arcade systems, LED signs, and more.

Containing long life dual ball bearings, the fan can run continuously for 67, 000 hours and be mounted in any direction. Fits standard us 7/8" x 14 female straight pipe thread draft fittings on US Sankey coupler. Hose barb nipple. Thermostatically controlled to prevent overheating. O-ring set includes: 5 lid closure o-rings 10 ball lock tank Plug O-Rings 10 Pin Lock Tank Plug O-Rings 10 Universal Dip Tube O-Rings.

AC Infinity AXIAL 1238, Muffin Cooling Fan, 115V AC 120mm by 120mm by 38mm High Speed - Refurbish five ball lock and/or pin lock kegs with this new O-ring Set. Alarm when sensor error or humidity exceeds limit. Control humidity by setting value and differential value. Alarm when humidity exceeds high/low humidity setting value. The best way to keep faucets clean and sanitary. Removable Stainless Grid.

More information about AC Infinity HS1238A-X


Similar products:
Uncategorized