16-Channel 12-bit PWM Servo Driver with I2C Interface

Using only two pins, control 16 free-running pwm outputs! You can even chain up 62 breakouts to control up to 992 PWM outputs which we would really like to see since it would be glorious. When we saw this chip, we quickly realized what an excellent add-on this would be. You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts.

Then you realize that your microcontroller has a limited number of PWM outputs! What now? You could give up OR you could just get this handy PWM and Servo driver breakout. Or maybe you want to drive a lot of LEDs with precise PWM output.

---

J-Deal® 10x Pcs SG90 Micro Servo Motor 9G RC Robot Helicopter Airplane Boat Controls

Sepcificattion: *j-deal sg-90 micro servo *all nylon gear *connector Wire Length 150MM *Name: 9 grams of steering gear *Size: 23mmX12. 2mmx29mm *weight: 9 grams *Torsional moment: 1. 5kg/cm *working voltage: 4. 2-6v *temperature range :0 ℃ --55 ℃: *Operating speed: 03 seconds /60 degree *dead band width: 10 microseconds Packager Content: 10 Pcs J-DEAL SG90 Mini Micro Servo Operating speed: 0

12second/ 60degree 4. 8v no load. Temperature range: -30 to +60 Stall torque 4. 8v: 17. 5oz /in 1kg/cm. Dead band width: 7usec. Operating voltage: 3. 0v~7. 2v.


Similar products:

---

Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055

Data output over I2C. Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor. Temperature range: -30 to +60 Stall torque 4. 8v: 17. 5oz /in 1kg/cm. Dead band width: 7usec. Operating voltage: 3. 0v~7. 2v. Absolute orientation, acceleration, angular velocity, gravity, magnetic field strength, linear acceleration, temperature.

Easy to use Adafruit tutorials. Easy soldering of header pins required. If you've ever ordered and wire up a 9-dof sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve.

. The sensor fusion algorithms the secret sauce that blends accelerometer, magnetometer and gyroscope data into stable three-axis orientation output can be mind-numbingly difficult to get right and implement on low cost real time systems. Bosch is the first company to get this right by taking a mems accelerometer, abstract the sensor fusion and real time requirements away, and spit out data you can use in quaternions, magnetometer and gyroscope and putting them on a single die with a high speed ARM Cortex-M0 based processor to digest all the sensor data, Euler angles or vectors.

The bno055 can output the following sensor data: absolute orientation euler vector, 100hz three axis orientation data based on a 360° sphereabsolute orientation quaterion, 100hz four point quaternion output for more accurate data manipulationAngular Velocity Vector 100Hz Three axis of 'rotation speed' in rad/sAcceleration Vector 100Hz Three axis of acceleration gravity + linear motion in m/s^2Magnetic Field Strength Vector 20Hz Three axis of magnetic field sensing in micro Tesla uTLinear Acceleration Vector 100Hz Three axis of linear acceleration data acceleration minus gravity in m/s^2Gravity Vector 100Hz Three axis of gravitational acceleration minus any movement in m/s^2Temperature 1Hz Ambient temperature in degrees celsius Operating speed: 0

12second/ 60degree 4.


Similar products:

---

Mallofusa Servo Arm Horn Metal Aluminum 25t Silvery for Rc Car Helicopter Round Mg945 Mg995 Mg996

Dead band width: 7usec. Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor. Suitable for hitec, parallax, Futaba and other brands 40 × 20 × 36mm standard servos. 14mm servo disc diameter: approx. 20mm pinking aperture: approx. 5. 5mm included: 5 x metal servos Mount 20 x Screws Operating speed: 0

12second/ 60degree 4. 8v no load. Data output over I2C. Easy soldering of header pins required. 100% brand new and high quality adjustable type servo arm 4 m3 tapped mounting holes Easy to repair Suitable for Hitec, Parallax, Futaba and other brands 40 ?20 ?36mm standard servos Color: Silver Material: CNC Aluminium Mounting Hole Spacing: approx.

Mounting hole Spacing: approx. Temperature range: -30 to +60 Material: CNC Aluminium. Absolute orientation, gravity, magnetic field strength, angular velocity, acceleration, linear acceleration, temperature. Easy to use Adafruit tutorials. Operating voltage: 3. 0v~7. 2v.


Similar products:

---

Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos ADA1967

It also comes fully assembled with two micro servos SG-90 or SG-92 type included and a 38mm x 36mm space to mount a camera or sensor or whatever you like. Stall torque 4. 8v: 17. 5oz /in 1kg/cm. Temperature range: -30 to +60 Servo disc diameter: approx. 20mm. Mounting hole Spacing: approx. Adafruit part Number: 1967.

This fully-assembled pan-tilt kit is the perfect way to give your project full range motion with two micro servos. Data output over I2C. Since the motors are plain, every-day analog servos, you can use any microcontroller or driver. Stock type: robotics & CNC >> Servos. In stock & Ready to Ship. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion.

Dead band width: 7usec. Operating speed: 012second/ 60degree 4. 8v no load. Suitable for hitec, parallax, Futaba and other brands 40 × 20 × 36mm standard servos.


Similar products:

---

Mini Kit - Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi

Absolute orientation, magnetic field strength, gravity, linear acceleration, angular velocity, acceleration, temperature. Easy to use Adafruit tutorials. Operating voltage: 3. 0v~7. 2v. The adafruit 16-channel 12-bit pwm/servo hat will drive up to 16 servos or PWM outputs over I2C with only 2 pins. If you would like to stack multiple hats onto one Pi, you can also pick up a 2x20 stacking header and a set of right-angle 3x4 headers that should be soldered on instead.

Adafruit part Number: 1967. The raspberry pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Temperature range: -30 to +60 Mounting hole Spacing: approx. The on-board pwm controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead.

Material: CNC Aluminium. Easy soldering of header pins required. It can also do pwm up to 1. 6 khz with 12 bit precision, all completely free-running. For use with raspberry pi model a+ or b+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20


Similar products:

---

66 channel w/10 Hz updates - Adafruit Ultimate GPS Breakout - Version 3

Easy soldering of header pins required. Operating voltage: 3. 0v~7. 2v. If you want to have an led on all the time, we also provide the FIX signal out on a pin so you can put an external LED on. Material: CNC Aluminium. In stock & Ready to Ship. The led blinks at about 1hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power.

Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor. It can also do pwm up to 1. 6 khz with 12 bit precision, all completely free-running. For use with raspberry pi model a+ or b+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20 Please note! this kit does not come with Raspberry Pi, servos, or required 5V power supply.

165 dbm sensitivity, 10 Hz updates, 66 channels. Absolute orientation, gravity, acceleration, angular velocity, magnetic field strength, linear acceleration, temperature. Easy to use Adafruit tutorials. Power usage is incredibly low, only 20 mA during navigation. Battery not included. 14mm.


Similar products:

---

Raspberry Pi Camera Module V2 - 8 Megapixel,1080p

Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor. Perfect for Raspberry Pi, Arduino and more! Operating voltage: 3. 0v~7. 2v. The adafruit 16-channel 12-bit pwm/servo hat will drive up to 16 servos or pwm outputs over i2c with only 2 pins. 2a power supply Highly Recommended. Absolute orientation, linear acceleration, gravity, angular velocity, magnetic field strength, acceleration, temperature.

Easy to use Adafruit tutorials. The camera v2 is the new official camera board released by the Raspberry Pi Foundation! Operating speed: 012second/ 60degree 4. 8v no load. Second generation Raspberry Pi Camera Module with Fixed Focus Lens. Dead band width: 7usec. 5v friendly design and only 20mA current draw. It can also do pwm up to 1.

6 khz with 12 bit precision, all completely free-running. For use with raspberry pi model a+ or b+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20 Please note! this kit does not come with Raspberry Pi, servos, or required 5V power supply. 165 dbm sensitivity, 10 Hz updates, 66 channels.




Similar products:

---

Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit

Material: CNC Aluminium. Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor. You'll still need to do a little soldering to put on the shield-headers or stacking headers but it should be even easier and faster to get started!2a power supply Highly Recommended. It can also do pwm up to 1.

6 khz with 12 bit precision, all completely free-running. For use with raspberry pi model a+ or b+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20 Please note! this kit does not come with Raspberry Pi, servos, or required 5V power supply. 165 dbm sensitivity, 10 Hz updates, 66 channels.

. This shield will make quick work of your next robotics project! We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements: Lots of other little improvements such as a polarity protection FET on the power pins and a bit of prototyping area. Adafruit part Number: 1967.

Pinking aperture: approx. 5. 5mm. Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.




Similar products:

---

Elegoo 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

Stall torque 4. 8v: 17. 5oz /in 1kg/cm. The adafruit 16-channel 12-bit pwm/servo hat will drive up to 16 servos or pwm outputs over i2c with only 2 pins. New version 2. 3! Mounting hole Spacing: approx. 5v friendly design and only 20mA current draw. Maximum of 1080p30 and 8MP Stills in Raspberry Pi Board. Material: CNC Aluminium.

Easy soldering of header pins required. So we can control the quality of our productions by ourselves for you. Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor. Pinking aperture: approx. 5. 5mm. Adafruit part Number: 1967. We'd like to receive your valuable suggestions for our products and make your idea come true.

We have the manufacture factory, making productions and selling by ourselves. You'll still need to do a little soldering to put on the shield-headers or stacking headers but it should be even easier and faster to get started! This also makes it drop-in compatible with any Arduino, Leonardo and Mega R3. As of 3/21/2014 we are shipping motor shields with the terminal blocks, and power jumper pre-soldered on.




Similar products:

---

Mini Kit - Adafruit DC & Stepper Motor HAT for Raspberry Pi

Up to 4 bi-directional dc motors with individual 8-bit speed selection so, about 05% resolution. Suitable for hitec, parallax, Futaba and other brands 40 × 20 × 36mm standard servos. Sony exmor imx219 sensor capable of 4k30, 1080P60, 720P180, 8MP Still.3280 h x 2464 v active Pixel Count. Only two pins sda & scl are required to drive the multiple motors, Due, and since it's I2C you can also connect any other I2C devices or shields to the same pins.

This chip handles all the motor and speed controls over I2C. Since the raspberry pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. Stall torque 4. 8v: 17. 5oz /in 1kg/cm. 14mm. Some soldering is required to assemble the headers on Operating speed: 0

12second/ 60degree 4. 8v no load. Adafruit part Number: 1967. Mounting hole Spacing: approx. Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.




Similar products: